Skip to main content

Reply to "First Super-Chuffer install that really needed the smaller Super-Chuffer II board."

harmonyards posted:

John, I have a lionel 6-28072 that had the old puffer smoke unit in it, I used a lioncheif fan smoke unit, I put a 27 ohm resistor in it ( the original was burnt up) I wired it to the original TMCC blue wire, and I used a MTH PS1 board to drive the fan (it was laying around) its powered directly to track power through a micro switch that is triggered from the original smoke piston lever...Its ok, but it lacks the oomph of what your super chuffers seem to do...question is, if I get a super chuffer II will that do away with my PS1 lever set up I have? I only get one chuff per rev, and getting the timing right was a real chore....thanks!...………………………..Pat

Hi,

If you want more prototypical cuffs, you would need the super chuffer II and a chuff generator which uses a tachometer strip on your flywheel instead otf the mechanical switch. He sells both and are actually designed to work together for the best results.

Hope this helps!

Last edited by Daniel J. Gonzalez

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×