Skip to main content

Reply to "First Super-Chuffer install that really needed the smaller Super-Chuffer II board."

John,

you state you swap out the MTH resistors for a twenty ohm resistor.  Any reason for that value?  I know any lower and you will surpass the current rating of the triac on R2LC board.  You also don’t want it to low as the smoke unit will run to hot.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×