Skip to main content

Reply to "Fixing a pre-war 228."

Better operation of the eunit can be obtained by adjusting the tension on the shoulder pivot screw. That screw is threaded into the hard fiber contact plate. It is then locked in place with a nut. To loosen up the operation loosen the nut and back the screw out about a 1/4 turn. Then while  hold the screw head from turning, tighten the nut.  

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×