Skip to main content

Reply to "FREE - TMCC & Legacy Information for MTH's Premium DCS Application!!"

Jim,

So I can add another cable to my junk heap.

Unless the cable is physically defective, the problem is elsewhere.

Questions:

  • Do TMCC engines work with the app?
  • If you remove the Y cable and just connect the 50-1032 cable directly between the TIU and the command base, do TMCC engines work using the remote? If so, the Y cable is defective.
  • Is the 50-1032 connected correctly? If reversed, it will not work. The ends are marked for which end is connected to which device.
  • You say: "The Premium APP works (with MTH engines with many glitches I will discuss later)". What are the glitches?
  • You say: "but as I expected, TMCC Engines on the DCS Remote have no response at all". Why did you expect failure?

If your setup is correctly connected and your assignment of the command base is to the correct TIU #, the system works just fine.

Last edited by Barry Broskowitz

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×