Jim,
First, the "9 dots" screen is the Soft Keys screen.
Second, if the TMCC engines don't work with either the app or the remote, regardless of whether the Y cable is connected, one of the following is wrong:
- The 50-1032 cable is defective.
- The command base is defective.
- The cable is installed reversed.
- The TMCC ID# of each TMCC engine is not the same as what you told the DCS Remote or the app they are.
- The TIU number that you provided when you added each TMCC engine is not the actual number of the TIU.
If you have a Cab-1 remote and you can operate your TMCC engines with it, then you can rule out it item number 2.
Running an MTH lashup at startup the (9 dot) page is gone.
If your Soft Keys screen shows no soft keys for lashups, you aren't using the latest version of the DCS App.You should update to the latest version.
Tap increase 4 or 5 times and speed goes to 100% throttle.
You have the TMCC engines set up with a speed control mode of "Default", which is the equivalent of the "big red wheel". Change it to TMCC 32.
2. Startup my 0-6-0 steam engine. Bell works, whistle does not. Go to (9 dot) page, Forward whistle works, reverse whistle works. Go back to Cab page, whistle does not work.
