Jim,
I am able to run TMCC with the DCS remote using the Cab-1 TMCC Base and the original cable that MTH released in 2004. This proves that my hardware and software is configured properly.
Then why did you tell us that you had problems running TMCC in the first place?
That 2004 cable will not work with the Legacy base at all.
If that's a #50-1018hat's completely correct. That cable will only work with a TMCC base, not with a Legacy Base.
That tells me that I may have a bad TIU/TMCC Legacy Cable.
No, that's not necessarily the case. Further, you still haven't determined why you say that your TIU is #1 and that the DCS Remote thinks that the command base is attached to TIU #2.
I am going to order a replacement 50-1032 cable.
I'd be surprised if the current #50-1032 cable is at all defective. If it is, it would be the first one of which I've ever heard, let alone encountered.
Regardless, I'm done attempting to assist you. You insist on not answering my questions or performing the troubleshooting steps that I've provided. I also suspect that there may be one or more things that you haven't disclosed that could get to the root cause of the issues that you've described.I can't help you if you won't provide the required information and I've grown tired of trying to help you if you won't help me, to help you.
I sincerely wish you the best of luck with your DCS. However, please take your issues to a different thread rather than hijacking this one.
