Skip to main content

Reply to "Gaps at joints in Gargraves track"

Great tips here but if the loop has already been assembled, screwed down and you still see gaps, clean the pin joints (I use a Dremel with a wire brush) then apply a bead of solder with your soldering gun.  To finish use a file and a small Dremel stone to smooth and shape the joint.  If you do it right you won't see any joint at all.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×