Skip to main content

Reply to "Gargraves flex track help"

For me in the past I have found it easier to trace out the curve on a piece of plywood, Cut the plywood to that shape and screw it to the bench top. I then place my track with one end against the jig and clamp it in place. Then just take my time and work from the clamped end around, NOTE- you will have to do this a couple times to get the tie spaced right. But once your done it will hold its form almost to the T.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×