Reply to "Gargraves flex track help"

I cut a "42 curve" in a piece of 1/2 or 3/4" plywood, laid it flat on the table, then bent the pieces to conform.  I connected and soldered the joints before trying to bend a curve made of two pieces.

Bill Cantrell

Vicksburg, MS

MTH O Scale, 3 rail

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×