Skip to main content

Reply to "Gargraves Track - Connect the Outer Rails - Yes or No"

I have both outer rails tied together only on yard tracks.  Elsewhere, one is tied to common and the other is open for accessory/signaling use.  But the TMCC RF signal reaches both outer rails.  Track is fed at one point on each table section (tables are =<8').  At each feed point, the two outer rails are connected together by a 0.1µF 50V ceramic disc capacitor, located at the track drop feed block under the table surface.  As construction is ongoing, I've only powered up the inner track of the 2-track mainline, but I had no problems running a Lionel TMCC Mohawk continuously.  Keep in mind that as soon as a train enters a new accessory/signal block, the wheelsets will connect the outer rails together.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×