Skip to main content

Reply to "Geometry of ROCO O Scale Turnouts"

I just checked my coal mine tracks.    There are 2 parallel tracks set up on 4 inch centers.    so not quite a yard but it shows the switch spacing.    I have an 8 1/4 inch long section of straight track separating the switches to get the 4 inch track spacing.

To get the spacing you want, try temporarily setting down two parallel tracks on the spacing you want and then locating the switches with diverging routes feed them.    Then measure the length of track required between the switches.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×