Skip to main content

Reply to "Greasing a 18009 Mohawk"

First snag.

Had to loosen the ash pan in order to fully release the chassis.  There is a short length of wire, soldered to the motor on each side, going through the cab openings.  There's not enough slack to fully remove the shell..  Don't tell me there's a cut required, please.

PonzMotor Wire

Attachments

Images (1)
  • Motor Wire

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×