New delivery.
My first 'foreign' engine.
A Swiss crocodile electric.
Video: 'yard test'
https://www.youtube.com/watch?v=qHgQNKqPasA
An unusual looking engine and it was 'cost effective' especially since it has a decoder.
Both sets of drivers are powered but...
only one set has 'electrical contacts'. Also, the flanges are not NMRA scale RP-25's.
All my turnouts are handmade so the frog depth is, also, scale so the drivers lift up and the engine stops.
If I run the engine fast, it makes it 'over' the frog.
Shouldn't be too bad to add another set of contacts to the other set of drivers.
Does have lots of 'traction tires' so it should pull well.
These were replaced with Kadees.
Extra parts.
No sound in the decoder but 'lights'.
I was expecting a larger engine but, being in Europe, I should have known they don't have large engines with each country being about the size of Ohio.
About the same length as a PRR P5A electric.
Large flanges.
Instructions in German.
4 'exploded' parts sheets.
Read the decoder but it gave me about 20 decoders to select so I just left the address as '03' and saved the data to the roster.