Skip to main content

Reply to "Great Northern railway"

Got a reply from Larry.

Need to buy some spst normally closed.

The problem is that the 210 does not like the auto reset function of the PSX. This is easy to fix. Install a jumper J7-1 to J7-2 with a normally closed push button in series with the jumper. The PSX will trip but will not try to reset. Once the fault is fixed, you can reset the PSX by pressing the button (opening the jumper). You can also reset the PSX by sending a SWCH command to address 997 and hitting c. To use this address, you will first need to remove power, install the Digitrax configuration jumper (J7-3 to J7-4), move the program jumper to the program position, apply power, and wait for D6 to stop flashing. Remove power and restore the jumper to the operate position. This will set the default address to 997. Use SWCH, 997, then c to turn the PSX on. A t will turn it off.

I now wished I would have put all the CB's along the top of the control panel, exposed so I can see them.  I'm going to have to relocated them all.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×