GN Y-1: decals completed.
Did the other side.
I use a super soft brush called a liner brush (LB-100) in art's department to apply the solvaset.
Decals are very thin and delicate so once the solvaset is applied, leave it alone. Saying that, I used the soft brush to remove any puddles on the decal for a few seconds after applying the solvaset to get a uniform finish. Like paint, better to apply two thin coats than one thick coat.
Found a fast way to dry glue. One spot light (sold at walbox). Need to keep it about 15-18" away as the brass got really hot when I had it about 6" distance.
I would imagine it would melt a plastic model.