Skip to main content

Reply to "Gunrunner John chuff generator questions"

You do not remove any wire from the tach reader. Also the flywheel does not get turned 1/4. After you connect the jumper wire then spin the flywheel as many times needed to move the actual drive wheels 1/4 turn. That equals 4 chuffs. Then cut the jumper. You should be set. I’m sure GRJ will help you further if needed. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×