Skip to main content

Reply to "Has anyone installed flanged wheels on a RailKing SD70ACe?"

Not sure if you can pull the wheels off the axles of MTH engines. It is my understanding that they are pressed on with a lot more pressure than post war wheels were. There is the possibility that you wheel puller will break before the wheel comes off. 

This was conveyed to me some years ago by MTH. Thus the reason they don't stock separate wheels.  You can buy wheel and axle sets but not separate wheels or axles.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×