I tried a similar product that I purchased on Amazon with mixed results. The key is to apply gloss coat after the print. The first few I did had the colors bleed through into the water. Then i applied more coats of gloss coat and those seemed to hold color better, but the decals were far more fragile than normal ones. After tearing a few apart, I realized I needed to over saturate them by letting them soak at least three minutes. That allowed me to slide them off easier. The last few I did worked out ok, but it’s still hit or miss, since they’re so delicate. I also realized that small, darker colored print works best. Fine detail with lighter colors come out much worse.
This is the one I’ve been using - https://www.amazon.com/Sheets-...611356112&sr=8-6
