Skip to main content

Reply to "Help needed please. Factory new RMT Beep Diesel."

@RSJB18 posted:

I took the whole assembly off and held the roller against my dremel. I didn't remove the roller but I'm sure it can be done.

One screw holds the board in place. The screws for the pick ups are in the well below.

Thanks Bill

Thanks, Bob. I thought you had removed the riveted pins and machined the rollers on a mandrel in the chuck of your Dremel. I'm very reluctant to remove the riveted pins as I don't have a rivet tool to re-rivet them.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×