Skip to main content

Reply to "Help needed - Proto 3 Locomotive omtove not moving"

If the engine has not been run in 9 years, the grease in the gearbox could be hard.  To get at the worm and gears, remove the single screw under the truck that goes to the motor.  Separate the motor from the truck, clean out the old grease including the worm gear on the motor,  relube  and see if that helps.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×