Hi all,
Update: Dallas you are right. I was surprised to see it move in conventional. Thanks again to you all for your comments. I increased the length of the conventional test track and low and behold it now runs back and forth in conventional mode (however with intermittent random bell ringing). See video. So there is improvement. https://youtu.be/v_b6LHIC3lg
In DCS it still barely moves at all - no change, so back to some of your original thoughts that there is something else wrong here. At first it was acting similar in conventional but now that appears to not be the case.
Jon, I appreciate the picture but I must be dense. I don’t know which wires I need to be folding. Any way you could drop an arrow on picture. That would really help!
Alan, sorry I think some of the tests you proposed are above my skill level at this point so I have not done them. The loco number is 30-20074-1. 
I’m in Edmonton Alberta Canada. So I have to mail this engine to Calgary if I can’t solve the issue. They do a good job but even just the post is pricey.
