Skip to main content

Reply to "Help needed - Proto 3 Locomotive omtove not moving"

Gerhardt .

Opened up my Railking Pennsy E8.

The "caps" that were mentioned previously are not totally bent over on my board . ..........The large yellow and white wires go to the motors............

Make sure the black and red wire screw connections to the trucks are tight.     Back them off a little ,then tighten down.

Attachments

Images (1)
  • 20210125_102232

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×