Alan Mancus posted:when you power up the tiu does the red led inside blink and if so how many times does it blink, usually it should blink 1 time and then stay on. also do you have the dcs turned on for fixed 1 which will make dcs work and then should not start up in conventional if dcs is turned on if dcs fixed one is turned off it will start up in conventional. also much check that the address is set to one if tiu blink's 1 time and address in remote is set to 1 remote should talk to tiu, another possibility is the transmitter board in the tiu or remote may have come dislodged if tiu was dropped or remote dropped. you can check this by taking tiu apart and remote to make sure. one if these issues is probably your problem. get back to us and someone can help you if this does not correct your problem.
best of luck
Alan
p.s. a good thing to have around is DCS companion is a great book to have for any dcs problems or issued you should purchase Barry's book can purchase thru either ogrforum or mth web sight don't remember which one but is good to have around in a pinch can save you hours of troubling shooting time.
With the cover off, I will go back and check the boards and make sure they haven't worked themselves loose. Is the remote as easy to open up? Will I break something if I try?
I do have Barry's newest book that includes all the WiFi info. I am trying to find my answers there and in the manual too. I'm just not having a lot of luck.
Thanks for your help, Alan.
