Skip to main content

Help repairing a K-line with TMCC- sounds but no movment

I was hoping for some help, I have a K-line F3 AA set.  when powered the lights come on, the sounds start , when I try to cycle through to go to forward or reverse nothing happens.  this engine has bi-directional LED marker lights and they change from red to green indicating that the engine thinks it is changing direction.  This engine has TMCC railsounds and signal sounds.  The motors seem fine, there is no binding in the gears.  I tested the feed to the motor and there is no power going to the motors when it should be.

 

any ideas or suggestions would help

 

Bill

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×