Skip to main content

Reply to "Help repairing a K-line with TMCC- sounds but no movment"

Bill Mine is the steam.  It moves, just very....very slowly.  No speed control.  I have seen this with 2 Allegheny's as I posted earlier in this thread.

 

Mine is upgraded with K-Line kit (I did it), and the other was a factory installed Cruise Allegheny.  Both sets of instructions said to use 4.   I have tried, 4, 7, 47, 74, 43, 34.  All work the same an the engine will move, just real slow.

 

So I don't know if there is a setting I should use for the cruise, or if the ERR codes, will work to turn off cruise so the engine will respond better.

 

Mine is a Ver 4.0 K-line cruise.  I know the 7 took, because the headlight behaved like a diesel, and when I went back to 4 it was constant.  Otherwise works perfectly in command, and can change speed steps etc....

 

I never noticed it until the customer bought the cruise version and only runs conventional.  Seems Bill above is having the same issue.  Runs in tmcc not conventional, so maybe he will try 7 and report.   G

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×