Well, I am at my wits end with this reset. Keep in mind that I'm using a 1033 which uses a lever to select the whistle in lieu of a button. I have no problem increasing power and coming back down to get the clinks/clanks needed to get to reset 18. Right after I get my 3 and 3, I leave the power where it is and move the whistle lever. No matter what technique I use to activate the whistle(slow, fast), I always get a loud one ding bell sound, not the soft warble bell. Also, I'm wondering if maybe it could be a bad board. When I bring the power up I get two bells. I put the power down and bring it back up and I would expect to move forward. The loco just sits there in idle mode. I power down again and bring it up and it is still in idle mode. The third time I bring it up the loco goes in reverse and all functions work(whistle, sound). A real puzzle, hey?
|
|
