Skip to main content

Help with DCS PS2 problem

I got my Challenger 30-1194-1  out of the box and placed the battery in it as i have done for the last couple of years for my Christmas layout Hooked up my TIU to Fixed 1 and set my transformer at 18 VAC as i have done previously and let it set for an hour to make sure the battery was charged. When I tried to start it up via the hand held the first time i tried it recognized the engine and allowed me to use the # 3 button to start it up but the volume is extremely low. it would allow me to move the engine in forward and reverse using the thumb wheel I only tried it up to 3 SMPH. I checked power at the track 18.0 VAC. I  checked power on the battery with track power applied 8.4 and unhooked is 6.4 VAC is the battery bad?  when i powered it back up now it does not recognize the engine and will not allow me add it. Any and all suggestions   greatly appreciated.   Sam

 

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×