Skip to main content

Reply to "Help with DipTrace"

There are tons of 3rd party DipTrace libraries around, many are posted in the DipTrace forums.  I've generally been able to either find a part or create one from a similar part.

One of the things I find handy with DipTrace is the 3D function.  If you have reasonably accurate sizes on your 3D components, you can evaluate fit and function before the fact while still not wasting board area.  I can usually create a 3D model from a similar model from the 3D library (mandatory download IMO).  You have the option of scaling and positioning in all three dimensions.  Once you get the hang of it, you can have a real view of your board as populated before you commit to copper.  For example, my Super-Chuffer.  If you have seen the actual board, this is a pretty accurate rendition, and it allows me to verify sizing and positioning.

 

 

Attachments

Images (2)
  • mceclip0
  • mceclip1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×