Ok, here's a rendition of it. The narrow table loses a lot of scenic space. 042 outer and 031 inner. 072 switches and curves for the junction,
031 switch for the r-loop.
The grade is 3.2% to 6.5"
There are two places where there is a fitment issue. A slight misalignment at the low right to the long straight and the piece of straight just past the switch on the r-loop straight will be a cut piece.
had to take sectional snips because of the length to zoom in for track number detail.
What do you think?
Carl,
I like it. However not crazy about the switch inside the tunnel. On a past layout I had a switch inside a tunnel and it always was trouble. I suppose the mountain and tunnel entrance could be shifted to the left and the trestle extended.
The narrow section (30") does limit scenic space. I will put a retaining wall with building flats along the wall.
The table section by the electric panel will be removable (just in case I need to change a breaker). The electrical panel will be covered by a removable flat of a power/industrial plant.
Would like to try and add least one siding and/or possibly a trolley line. I realize this is being limited by the 30" depth. I could expand it, possibly to 32".
Thanks again for your help.
Paul
