Skip to main content

Reply to "Help With Track Design"

Hi Paul,

I tunneled the top switch on L1 to provide a surface for the elevated switch.

 

It was also for 3D eye candy.

 

Do you have a way to support the elevated switch from the two mains?

 

How will you handle the elevated r-loop? terrain or supports?

 

There are two measurements that I had to guess. If you give them to me I can correct the table dimensions.

 

The first would be from the left side to the point of the angle where the 15' run starts.

 

The second is the end near the door. I didn't know the width and made it 48". Will you just make the top larger than the frame or should it be smaller? There has to be some room edge to track. It's 042 outer there.

 

here's the tunneling removed.

Attachments

Images (2)
  • PW Trains 8.11.2015 3D5 Wall view
  • PW Trains 8.11.2015 3D6 End view
Last edited by Moonman

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×