Skip to main content

Reply to "Help With Track Design"

Hi Paul,

I started the grade on the first curve at the door end and the same rise height to 6.5" at the switch.

 

It makes it a 2.1% outer and 2.3% inner.  I had 76" at the angle to the left side where 15' run starts. So, it will fit on your table.

 

There will be 7' between the two inner tracks (outside rails) for a trolley, buildings and such.

 

I used 40" straights here and there. Will you use 10"s? I want to give you some sectional close-ups of the plan. Then you can see the exact track and heights for supports to achieve the grade.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×