Skip to main content

Reply to "Hot and common: where on PCB?"

Keith L posted:
gunrunnerjohn posted:

The number of motors makes no difference to this board, one or a dozen.  I'm totally confused why your boards do something odd.

I wasn't referring to 2 motors vs. 1 motor. I was just trying to say that there's only the board, an external cap, and the motors. Both the board and the cap are new. It seems highly unlikely, but could an issue have possibly developed with a motor that could cause the weird behavior?

OK, I'd have to be at least looking at the wiring and motors since you've replaced the board.  Of course, with four wires, you can fire up either of the boards you have on the bench with a spare motor and see if they exhibit the behavior you describe.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×