Skip to main content

Reply to "How can I make a Lionel insulated tubular O scale track section"

Nick, I have the same kind of track you do. I would open the tab on the track wide enough so that you can slide the rail out with enough clearance so that you can slide it back in with a couple of layers of black electrical tape to insulate it from the ties, then recrimp the loose tie clamps. It does not need to be real tight. You will know when. 2 layers of tape will work fine and not cut through. I have had mine like this for 5 years and it still works fine.

Do the above with as many lengths as you need.. Don't forget the plastic pins at each end of your insulated section. Have fun doing it.

Oh, and don't take the pranksters too seriously.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×