guys thanks.
tthe photos are from on scene about 12 sq ft total... Area in front of building was 6 mm. The first photos was 12mm wth some silfor tuffs mixed with it. In the first photo, a foam base was covered with wet (paste like- sticks to a spoon consistency) fusion fiber that had been tinted. (There were two batches , one grey and one brown.) Once spread I used a commercially available grass gun and static grass. I have used all the commercially available grass guns and a few of the static grasses. There is a bit of a technique with grass gun, and I thank Jim Elster of scenic express for sharing this with me at the timonium, md show a few yrs ago. It took a about 4 hrs to spread the fusion fiber and add static grass. The fusionfiber already has the glue in it. The technique is completely different then one used by the "scenery experts" in videos as I laid the fusion fiber over the full 12 sq ft and did it all at once. didnt have to worry about the fusion fiberr dryiing too quickly. If if does i just mist it with water prior to adding static grass
The attachment show a closeup with 6 mm.
When i do this i make sure all the deadfall, rocks, etc are already in place. BTW the road is fine ballast on fusion fiber also.
