Skip to main content

Reply to "How to convert fastrack switch to Command Control"

This was planned for over a year.  We had to design a new PCB, write instructions, and wait for the board to be manufactured.  The PC boards are due in next month (4 -5 month lead times).

 

 Why design a new PCB?  The existing Motor Driver board was obviously designed by Lionel to both take a switch command, coming from the Radio board, and output track voltage to a Radio PCB. The cost should be under $5 to add the external 5V regulator necessary to drop that track voltage from the old Motor Driver PCB, to the +5V necessary for the new Radio PCB.  That would save $23-$5=$18  by not having to buy a new Motor Driver board.  This drives the cost down to $31 per switch, to do 4 switches, or $27 per switch to do 10 Switches.

 

Last edited by GeoK

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×