About a month ago I picked up a Railking 2-6-0 loco. I got it cheap because it had a 3 clank problem. I Used a chip to get the three clanks out of loco and that was good. This loco still wouldn't move I even tried switching out the top and bottom proto 1 boards but it still would move. I removed motor and gave the motor voltage and it started to run. I find out that the axles are binding and motor could move it. I tried WD40 and working the wheels and I still can't get it to move freely. Is there any way to get lubrication to the axles?
Original Post