Skip to main content

Reply to "Hydrocal / Wood Kit Build - Berkshire Valley Update 11-12"

Below is the roof structure. I used super glue to attached the roof posts -

2020-09-09 6 Berkshire Valley Ice House [2)

then used wood glue to attach the horizontal beams plus some end rafters. Tomorrow I will see if the sub-roof is strong enough on its own not to bend. If not I will need to think of more supporting rafters. Either way I will probably need to glue supports to the sub-roof to keep it from curling up during paint.

2020-09-09 6 Berkshire Valley Ice House [3)

I started to glue in the flooring. As can be seen the scribed wood sections are warped. I used super glue at the ends and wood glue in the middle then weighed down the sections with 123 blocks.

2020-09-09 6 Berkshire Valley Ice House [4)

2020-09-09 6 Berkshire Valley Ice House [1)

Attachments

Images (4)
  • 2020-09-09 6 Berkshire Valley Ice House (1)
  • 2020-09-09 6 Berkshire Valley Ice House (2)
  • 2020-09-09 6 Berkshire Valley Ice House (3)
  • 2020-09-09 6 Berkshire Valley Ice House (4)
Last edited by Joe Fauty

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×