Skip to main content

Reply to "IDENTIFICATION OF A PIECE OF EQUIPMENT"

If you attempt to turn the crankshaft does it turn freely ?   I would put a drop of oil on every pivot or sliding point and in the hole on the steam inlet shaft. Put several drops in that hole and hook it to about 10lb of compressed air OR try using a can of Dustoff to power it.          j

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×