Skip to main content

Reply to "Improving the Lionel Phantom Locomotive"

If the EL wire does not work out for you and alternative would be Fiber Optic Solid Core Side Glow Cable. It comes in many different sizes. The only thing is it needs an Ultra Bright LED to light it. If the run is long I place one LED at each end to increase the brightness. For single strand I will drill a small hole in the end of the led for mounting the fiber and gluing in place with UV glue then cover the led in shrink wrap. Do not us snips to cut the fiber use a Razor blade or Xacto knife for a clean square cut to get the maximum brightness out of the strand. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×