Hi Eric,
Thank You for the thread on the 15" K Line ESE cars, it was very informative for me.
I have the K line ESE locomotive with TMCC and Railsounds, and am waiting for the K4670A 4 car set to arrive. Do you have any duplicates not in that set, that you might be interested in selling?
With all the sets you have, I would guess that you also have the Locomotive as well? My Locomotive loses the chugging after running, sometimes more quickly than others. Strangley, the chugging usually lasts longer in reverse, before dropping out, than it does moving forward, but, will usually drop out in reverse eventually as well. Normally after stopping(and possibly after cycling the power on/off, I havent thought to pay attention to that until now) the chugging will return, and then drop out again. The back ground sounds still operate, as well as the whistle and bell, even after losing the chugging.
Have you had, or heard of this issue before? is it a sensor out of adjustment, a bad board, or somethingelse maybe?
Btw, this is in conventional operation, I don't have a permanet layout yet, and though I have TMCC/Legacy, I haven't hooked those up yet to see if, the issue persists in command as well as conventional operation.
Thank You,
Doug
