Skip to main content

Reply to "Initial set up of 990 with a cab1 attached"

Has the engine ever been on a layout with TMCC or Legacy?  If not chances are the TMCC ID is 1.  Try addressing it as ENG 1 using the CAB1 or CAB2  If you are unsure, then follow the programming instructions in the engine manual or turn off the track power and locate the PGM/RUN switch on the engine.  Move it to PGM.  Put the engine back on the track and power up.  Push ENG a number between 2-98 (typically the first or last numbers in the road number) and then push SET.  The horn should beep, headlight flashes.  Turn off power and slide the switch back to RUN.  Then return it to the track and power up.

Next select ENG the number assigned above, then blow the horn or press 3 for startup sequence.  Move it out!

Last edited by MartyE

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×