gunrunnerjohn posted:ERR sells the Sound Converter for $24.95, it's primary purpose is to allow the use of conventional horn/bell boards with command control. However, another "feature" is two outputs for ditch LED lights on the 6-pin connector, they are triggered using serial data from the R2LC.
If you are doing a DC motored unit, what I do is use the R2LC and ERR Cruise Commander M combination, the CC-M has ditch light outputs.
Lionel actually released the Sound Converter design and the code, it's posted in the TMCC Documentation thread. Here's a Link to the post: https://ogrforum.ogaugerr.com/t...43#48593297326356943
John since I am using an AC motored unit and there is currently no sound board in the locomotive I was going to add both the AC commander and the RailSounds Commander boards. If I want the ditch lights do I put the sound converter between the AC commander and the RailSounds commander as shown in the link PDF?