Thanks for the tips. Separated the electronics platform from the rear truck frame which is 3/4s the length of the tender. There on the truck frame I saw the wiring of the 2 pickup rollers. In pic 1, the 2 pickup rollers are connected to each other by a black wire; then, from one of the rollers there is a gray/white wire attached to a chrome phillips screw going up into the tender body. In pic 2 that gray/white wire once in the tender body goes under the electronics board. In pic 2, you can see the white/gray wire secured by that chrome philips screw to the pickup rollers. Hence, would putting an eyelet on the YLB red wire and connecting it to the chrome screw do the job????
|