Reply to "instructions adding ERR with supper chuffer and railsounds 4.0"

Installing on a 3rd rail sunset steam engine the Cruise Commander and Rail Sound 4.0 are mounted in the tender. I have plenty of room in the tender for the Super Chuffer. I have a four-revolution or two-revolution microswitch a hard wire tether. The trigger sound on the Rail Sound 4.0 board is connected to the two-revolution micro switch. Works great and no problems. I installed the Super Chuffer per instruction checked wiring and it did not work I check continuity between each wiring connection and all are ok. I then tried connecting just the smoke unit with the Super Chuffer not installing connections to lights. Here are some Photos what I am doing. I took all connections out because not sure if I have the right schematic. The fly wheel does not work unable to program.

Rail sound board wire that make chuff sound Works ok connected to micro switch on engine instructions said do not place ground on leads will damage board

 

Smoke Unit usingtender leads are not connectedRailsound board

Attachments

Photos (1)
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×