Skip to main content

Reply to "Insulated Rail Relay Based Sensor"

I'm giving thought to leaving out the one resistor and including a couple different values in the package, so you can "tune" it for the voltage you have.  Being a thru-hole design, it's simple for most anyone to solder the correct value resistor into place for the specific voltage you're running the relay coil at.  Obviously, I don't care what voltage you use on the relay contacts.  The values in the schematic are good for 16-22 volts AC on the track, but if you had 12 VAC, you'd probably want a lower value resistor.

I'm hoping the Chinese get my terminal strips and relays here so I can put a couple together.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×