Skip to main content

Reply to "International Hobby 2 stall Engine House Question"

Jim,  I am not sure about the roof supports, I haven't assembled one of those kits for fifteen years.  May I suggest as you assemble each side you use something to brace them? They are flimsy. You might consider placing 1/2 x 1/2 lengths of wood on the inside of slopes of the end walls.  That will give the glue a greater surface to adhere to.   Also, before you put the walls together decide what color you want the inside walls.  It is a good size building with large doors and windows allowing the insides to be seen.  A light color or two colors(dark green on the lower 10 feet, light green above that?) may add interest to the engine house.  Perhaps members of this forum could share photos of their completed buildings.   John in Lansing, ILL

Last edited by rattler21

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×