Skip to main content

Reply to "IR or Optical Sensors"

Hi all.

 

Just another tidbit of info. I have ordered many different LEDs (from China via ebay) and have only found a couple that fit in my 022 switches. Most are either too fat or sit too high so that the red/green cap doesn't fit. Most recently I found some very inexpensive LEDs that fit perfectly and have 7 emitters (so the coverage is great to shine thru the red/green lens'. The one's I have are bayonet style and require 12VDC. As I wrote earlier, you can remove the wire attached to the constant voltage terminal that goes to the light bulb socket and power the LED via that wire. I have sent them a message asking whether they have the exact same style in a screw type base ()which I will need also). The AC LEDs are great but way too expensive if you need 50 of them.

 

The ebay link to these LEDs is:

 

http://www.ebay.com/itm/361141...e=STRK%3AMEBIDX%3AIT

 

Ken

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×