Skip to main content

Reply to "Is a pair of "AA" Ni-cad 1.2V 800mAh an acceptable replacement for a pair of 1.2V 700mAh batteries?"

TrainLarry posted:

As long as the voltage is the same, you are OK. The extra 100mAh will give you extra capacity until the batteries run low and need recharging. The circuit will only draw it's design current irregardless of the battery capacity. You can put enough batteries in the circuit to have 1 amp or more of capacity, and as long as the voltage is 3v to the circuit, the circuit could care less. The board is not in danger of being fried.

More mAh equals more time before recharge.

Larry

It's exactly like having a bigger gas tank on your car.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×