Still haven’t received the AC to DC converter module or the timer module. Here’s what I’ve completed so far.
The lines from the 1032 are independent- not connected in any way to the other buss lines. I’ve run three lines - one each from the U, B, and C posts (C to be used with the stop and go centers we are setting up and any trolley related accessories)
Because the trolley run is 20 feet I’ve planned on three power drops, one at each end and. one approximately half way, co-incidentally near each of of the there 153ir.
The drawing suggested to ME that the power for the timer - converter - 153ir unit goes to the timer module first the to the converter and on to 153ir. (Maybe because I’m reading right to left)
Your last post says that is not the case but I don’t see a direct path to the Ac-DC converter unless the lines go into the ports labeled B and C. But if that’s the case what are the lines labeled U, B, and Center rail on the right side of the timer
An easy question: Are the 153ir units located in isolated blocks of track
