I’m in the home stretch on all this wiring but am wondering about the the 10 to 15 feet of 20 awh solid core wire I have running between the modules and the 153IRs
I used the solid core wire because it fits in terminals more easily than stranded wire. In each case however the wiring traces from the modules to a terminal block where the lines split off in three directions toward towards the 153IRs. I could easily switch to 20 gauge stranded wire at that point, and switch back to solid core wire immediately before the 153IRs
Would the superior conductivity of stranded wire be an asset?
Relative to the Menards building, I’ll likel be following diagram #2, definitely NOT # 3